OTM2602 1G Packet Ethernet Module is a compact test solution for the installation and maintenance for Metro/Carrier Ethernet and IP services. It supplies a compact test solution for 1G packet Ethernet, include ITU-T Y.1564 standard for SLA and OAM test features.
This module is compatible with OTP6200v2 (OPWILL Intelligent Network Test Platform).
10/100/1000M Base-T and 100/1000M Base-X dual media test interfaces, and full-duplex and half-duplex (exclude 1000M) for all rates;
Network configuration testing and performance testing per standard ITU-T Y.1564;
RFC2544 and Y.1564 Bidirectional testing;
Traffic scan according with MAC, IP, VLAN, MPLS Label, and so on;
VoIP jitter testing according with standard RFC3393;
IPv4 and IPv6 traffic generation;
Pass through monitor testing;
Fully integrated solution for synchronised packet networks;
Master clock and slave clock emulation;
Perform throughput, latency, frame loss, and back-to-back measurements per industry-standard RFC2544;
Generate up to 8 traffic flows with different MAC address, VLAN tags, MPLS, IP address, TCP/UDP, payload, and bandwidth
IEEE802.3ah, IEEE802.1ag, ITU-T Y.1731, and ITU-T G.8113.1 OAM support;
Ethernet BER and loopback testing at layer 1, layer 2, layer 3, and layer 4
Smart loop mode for layer 1, layer 2, layer 3, and layer 4;
Service disruption test;
Supports IEEE 1588v2/PTP and SyncE;
IEEE 1588v2/PTP analysis;
Support all type PTP messages real time statistics;
ESMC SSM generation, monitoring and decoding.